End-of-Lease Outdoor Pressure Cleaning: A Logan Tenant Checklist
@dallasiwem114
November 20, 2026 · 7 min read
Moving out of a rental in Logan, Browns Plains, Springwood, Marsden, Algester or elsewhere across Brisbane's southern suburbs usually means a long list of jobs before the final inspection. Most tenants focus on carpets, ovens and windows, but outdoor areas are a common reason for disputes and bond deductions. Driveways, patios, pathways and fences all form part of the property condition report, and they are expected to be returned in the same condition as when you moved in, allowing for fair wear and tear.
This guide covers what property managers look for https://pressurecleaningbrisbanesouthside.com.au/gutter-cleaning/ outside, how to approach pressure cleaning, what the rules say in Queensland, and when it makes sense to hire a professional.
Why Outdoor Areas Matter at End of Lease
In Queensland, the Residential Tenancies Authority (RTA) oversees bonds and tenancy disputes. Your Entry Condition Report (Form 1a) records the state of the property when you moved in, including outdoor areas. At exit, the property manager or lessor compares the property against that report. If the concrete was clean at the start and is now covered in oil stains, mould and moss, they can claim cleaning costs from your bond.
Southern Brisbane's humid subtropical climate makes this more likely. Warm, damp conditions encourage mould, algae and mildew on concrete, pavers, timber decks and fences, particularly in shaded spots or areas that stay wet. Many Logan properties also have large concrete driveways and covered patios that collect grime quickly, plus nearby trees that drop leaves, sap and fruit that stain surfaces.
Know the Standard: Fair Wear and Tear vs Tenant Responsibility
Tenants must leave the property as clean as reasonably possible, allowing for fair wear and tear. Gradual weathering of concrete or slight fading of paint over several years is usually considered fair wear and tear. Oil leaks from a car, food spills, pet waste marks, or built-up mould you could have reasonably cleaned during the tenancy are usually seen as tenant responsibility.
Check your Entry Condition Report and any photos taken at move-in. If the report notes existing stains or mould, you are generally not responsible for those. Keep your copy of the report handy as you plan your cleaning.
The Logan Tenant Outdoor Cleaning Checklist
Use this list to walk through the property before your exit inspection. Tackle each area and take dated photos once finished.
- Driveway and carport: Remove oil and grease marks, tyre marks, and any moss or algae. Degreasers work best on oil before pressure washing.
- Front and back paths: Clear leaf stains, mould and dirt from concrete or paving, especially along shaded edges.
- Patio, pergola and alfresco area: Wash the floor, wipe down posts and remove cobwebs, wasp nests and dust from ceilings and beams.
- Timber decks and verandahs: Clean gently with lower pressure to avoid damaging the timber. Remove mould and sweep between boards.
- Fences and gates: Wash away dirt, mildew and spider webs, and check for marks left by pets or equipment.
- Exterior walls and downpipes: Spot clean dirt, mud splashes and mould at ground level and around outdoor taps and power points.
- Bins and bin storage area: Wash wheelie bins, clean the bin pad and remove any spills or odours.
- Garden beds and lawn: Mow, trim edges, remove weeds and rubbish, and clear leaf litter from gutters and drains where accessible.
- Letterbox and outdoor fixtures: Wipe down letterboxes, clotheslines, outdoor lights and external stairs.
DIY Pressure Cleaning: What to Know Before You Start
Hiring or buying a pressure washer is an option if you have time and the right equipment. A few practical points will help you get a good result without causing damage.
Choose the Right Pressure and Nozzle
Concrete can handle higher pressure, but pavers, timber, painted surfaces and older render need a gentler approach. Using a narrow, high-pressure nozzle on soft surfaces can gouge timber, strip paint, loosen paver sand or leave visible lines called zebra striping. Test a small, inconspicuous spot first and keep the nozzle moving at a consistent distance.
Pre-Treat Stains
Pressure alone often will not shift oil or deep-set mould. Apply a suitable degreaser to oil spots and let it sit before washing. For mould and algae, an outdoor cleaning solution designed for the surface works better than water alone. Always follow the product instructions and wear gloves, eye protection and closed footwear.
Mind the Water and Runoff
Wash water containing detergents, oil or grime should not flow into stormwater drains, which lead to local creeks and waterways such as those feeding the Logan River. Where possible, direct runoff onto lawn or garden areas (avoiding chemical-heavy water on plants), or use a method to capture and dispose of it properly. Check Logan City Council and Brisbane City Council guidance on stormwater and water use, as local restrictions can apply.
Stay Safe
Pressure washers can cause serious injuries and damage windows, light fittings and door seals. Keep the spray away from power points, meter boxes, and gaps around doors and windows. Wet concrete and tiles can become slippery, so wear non-slip footwear and take care on slopes and steps.
When to Hire a Professional Pressure Cleaner
DIY works for light dirt on small areas, but professional cleaning can be the better choice in several situations:
- Large driveways, multiple outdoor areas or two-storey homes with hard-to-reach walls
- Heavy oil staining, rust marks or long-term mould and algae growth
- Delicate surfaces such as old timber decking, pavers with loose joints, or painted finishes
- Tight timeframes before the exit inspection or handover date
- No access to a pressure washer, or concern about water runoff and mess
Professional operators use commercial-grade equipment, surface cleaners that deliver even results on flat areas, and treatments suited to different materials. Many also provide a receipt or invoice, which you can give your property manager as evidence the work was done.
Timing Your Clean for the Best Result
Plan your outdoor cleaning for toward the end of your move-out process, after removalists have finished and vehicles are no longer coming and going. Cleaning the driveway first, then having a truck leak oil on it, defeats the purpose. Similarly, complete gardening and tidying before pressure washing so that grass clippings and leaves do not end up back on clean surfaces.
Southern Brisbane's weather also plays a part. Summer storms and humid conditions can bring fresh mould and debris quickly, so aim to clean within a few days of your final inspection. Allow time for surfaces to dry fully, as damp areas can look darker or stained in photos and inspections.
Document Everything
Good records can protect your bond if there is a disagreement. Before you hand back the keys:

- Take clear, dated photos and short videos of every outdoor area after cleaning
- Compare them with the photos and notes from your Entry Condition Report
- Keep invoices and receipts for professional cleaning, equipment hire or cleaning products
- Attend the exit inspection if possible so you can discuss any concerns on the spot
If a property manager claims money from your bond for outdoor cleaning and you disagree, you can dispute it through the RTA, which offers a free dispute resolution service. Having photos and receipts makes your case much stronger.
Common Mistakes to Avoid
- Using too much pressure on soft surfaces: This can cause permanent damage that costs more than the original dirt.
- Ignoring the small details: Cobwebs, wasp nests, dirty gutters and grimy outdoor taps are easy to miss but often noted.
- Leaving it until the last minute: Stubborn stains may need pre-treatment and drying time.
- Forgetting the lease agreement: Some agreements specify outdoor cleaning or lawn care duties, so read yours carefully.
- Skipping photos: Without evidence, it is your word against the lessor's.
Final Thoughts
Outdoor pressure cleaning is one of the most visible parts of an end-of-lease clean, and in Logan's warm, humid climate it can make a real difference to your final inspection. Work through the checklist, match your cleaning method to each surface, keep records, and book professional help early if the job is bigger than you can manage. A little planning means a smoother handover and a better chance of getting your full bond back.
Brisbane Southside Pressure Cleaning
(07) 3179 6111